Try this Mtron SSD (solid state drive). There is no way back! This is already a very fast flash based SSD. For a faster SSD look for the Mtron PRO 7000 Series, and the PRO 7500 Series are even FASTER !
I/F: ATA-133 & SATA 2.0
F/F: Industrial Standard 3.5 inch form factor
Single Level Cell (SLC)
Capacity: 16GB
Casing: Aluminium
Performance:
Sustained Read: 100MB/s
Sustained Write: 100MB/s
Access time: less than 0.1ms !
Warranty: 3 years
| Host Interface | Interface | SATA 2.0 |
| Transfer Mode | PIO mode (0~4), DMA mode (0~2), Ultra DMA mode(0~6) |
|
| Capacity (GB) | 16 (GB) | |
| From Factor | 3.5" | |
| Performance | Average Access Time* | 0.1 msec |
| Sustained Read** | 100 MB/sec | |
| Sustained Write** | 100 MB/sec | |
| IOPS*** (Sequential/ Random) | 76,000/16,000 | |
| Power | Input Voltage | 5VCC +/- 5% |
| Endurance | Write Endurance | >140 years @ 50GB write per day**** |
| Read Endurance | Unlimited | |
| Wear-leveling algorithm | Dynamic and static wear-leveling | |
| Data Retention | 10 years at 25°C | |
| Reliability | MTBF | 1,000,000 hours |
| ECC | 7-bit Error Correction Code (ECC) | |
| Bad Block Management algorithm | ||
| Environment | Operating Temperature | 0~70°C |
| Test Environment | 1. Test Item : MSD-SATA3025 ( 2.5 , 32GB, SATA1 ) 2. Test PC : AMD Athlon 4800+ Dual Core (2.4GHz) 1GB RAM, NVIDIA nForce 570 Ultra MCP (UDMA133/SATA2), Window XP SP2 * HD Tach 3.0.1 ** ATTO Disk benchmark 2.02 *** IOMeter July 30. 2004 **** Sequential Write, 32GB Mtron SSD |
|