MTRON MOBI-PATA-3018-16-ZIF2

Mtron Solid State Drive

Due to its outstanding performance and features, Mtron SSD will be the next generation storage choice in the Personal computing market. Because of the low performance of 2.5 & 1.8 HDD's, newer systems cannot fully Utilize their high performance CPU and DRAM, dragging down overall performance to the speed of the HDD.
In addition, the recent trent of personal computing is shifting towards the wireless environment where constant Moving causes frequent HDD failure.
Mtron SSD resolves all of these problems to meet tomorrow computing needs.

I/F: ATA-7
F/F: Industrial Standard 1.8 inch form factor
Connector type: ZIF (Zero Insertion Force) type
Single Level Cell (SLC)
Capacity: 16GB
Casing: Aluminum
Performance:
Sustained Read: 100MB/s
Sustained Write: 100MB/s
Access time: less than 0.1ms !
Warranty: 3 years

SPECIFICATION

Host Interface Interface ATA-7
Transfer Mode PIO mode (0~4), DMA mode (0~2),
Ultra DMA mode(0~6)
Capacity (GB) 16 (GB)
From Factor 1.8"
Performance Average Access Time*  0.1 msec
Sustained Read**  100 MB/sec
Sustained Write**  100 MB/sec
IOPS*** (Sequential/ Random)  25,000 / 16,000
Power Input Voltage 3.3VCC±5%
Endurance Write Endurance  >140 years @ 50GB write per day****
Read Endurance  Unlimited
Wear-leveling algorithm  Dynamic and static wear-leveling
Data Retention  10 years at 25°C
Reliability MTBF  1.000.000 hours
ECC  7-bit Error Correction Code (ECC)
Bad Block Management algorithm  
Environment Operating Temperature 0~70°C
Test Environment 1. Test Item : MSD-PATA3018 ( 1.8" , 32GB)
2. Test PC : AMD Athlon™ 4800+ DDR2 6400 1GB*2pcs (Dual Channel), NVIDIA nForce 570 Ultra MCP (UDMA133), Window XP SP2
* HD Tach 3.0.1
** ATTO Disk benchmark 2.41
*** IOMeter 2006.07.27
**** based on the quaranteed 100,000 program and erase cycle of flash memory from vendors and assumption, Sequential write